AM26LV31E is a four-way differential line driver with three-state output. This driver has ±15kV ESD(HBM and IEC61000-4-2, air gap discharge) and 8kV ESD (IEC 61000-4-2, contact discharge) protection. The device can meet the requirements of TIA/EIA-422-B and ITU recommended V.11 driver with a small power supply voltage.

This device is optimized to achieve balanced bus transmission at switching rates up to 32MHz. The output terminal can provide high current, thus driving balanced lines such as twisted-pair transmission lines and providing high impedance in the case of off.

The working temperature range of AM26LV31EI is-40 c to+85 c.

Meet or exceed the requirements of TIA/EIA-422-B and ITU recommendation V.11
Powered by a single 3.3V power supply.
Provide ESD protection for RS422 bus pins
±15kV human discharge model (HBM)
8 kV IEC 61000-4-2 Contact Discharge
±15kV IEC61000-4-2 4-2 Air Gap Discharge
The switching frequency is as high as 32MHz.
Propagation delay time: 8ns (typical)
Pulse offset time: 500ps (typical)
High output drive current: ±30mA
Controlled rise and fall time: 5ns (typical)
Differential output voltage at 100Ω load: 2.6V (typical)
Support 5V logic input and 3.3V power supply.
Ioff supports local shutdown mode operation.
Driver output short circuit protection circuit
Non-interference power-on and power-off protection
Packaging options: SO, SOIC, TSSOP, VQFN.