Order Microchip Technology MCP2551-I/SN on Hxcy.IC. Confirm available stock and prices, check the product specifications for MCP2551-I/SN,and place an order online.Contact Email:Fit0209@hxcyic.com

The MCP2551 is a high- speed CAN, fault- tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The MCP2551 device provides differential transmit and receive capability for the CAN protocol controller, and is fully compatible with the ISO-11898 standard, including 24V requirements. It will operate at speeds of up to 1 Mb/s. Typically, each node in a CAN system must have a device to convert the digital signals generated by a CAN controller to signals suitable for transmission over the bus cabling ( differential output). It also provides a buffer between the CAN controller and the high- voltage spikes that can be generated on the CAN bus by outside sources (EMI, ESD, electrical transients, etc.).

Features
·Supports 1 Mb/s operation
·Implement s ISO-11898 standard physical layer requirements
·Suitable for 12V and 24V systems
·Externally- controlled slope for reduced RFI emissions
·Detection of ground fault (permanent dominant) on TXD input
·Power- on Reset and voltage brown- out protection
·An unpowered node or brown- out event will not disturb the CAN bus
·Low current standby operation
·Protection against damage due to short- circuit conditions ( positive or negative battery voltage)
·Protection against high- voltage transients
·Automatic thermal shutdown protection
·Up to 112 nodes can be connected
·High- noise immunity due to differential bus implementation
·Temperature ranges:
- Industrial (I):-40℃ to +85℃
- Extended (E):-40℃ to +125℃